Learn how to Fold
Mailer BoxProduct BoxShipping Box2 Piece BoxShoe Box
Mailer Boxes
Shipping Boxes
Shoe Boxes
Product Boxes/Bottle Boxes
2 Piece Product Boxes
Mailer Boxes
Step 1
Place the net so the inside face is upwards.
Step 2
Fold all the sides around the base up and fold the 2 flaps inside.
Step 3
Fold the 2 opposite side over the flaps & tuck them into the slots in the base.
Step 4
Fold the lid inwards ensuring the flaps on the each side sit inside the box.
Step 5
Fold the top side of the lid over the front of the base & place the 2 rounded flaps into the slots.
To prevent creasing, try to complete this step in 1 smooth motion.
You're all done!
Shipping Boxes
Step 1
Place the net so the inside face is upwards.
Step 2
Locate double sided tape in the highlighted area & remove film.
Step 3
Fold the side around & stick to the double sided tape ensuring it sits flush with the edge of the box.
Step 4
Fold The 2 smaller flaps in first then the 2 larger flaps over the top.
Step 5
Our PVC free tape can now be used to seal the box shut.
Step 6
Repeat the same process as step 4 on the top of the box.
You're all done!
Shoe Boxes
Step 1
Ensure the net is led down so the inside of the box is facing upwards and it is rotated to match this image.
Step 2
Fold the sides around the bottom half of your net ensuring the slots are visible.
Step 3
Fold the 4 small flaps along the crease lines at the same angle as the slots.
Step 4
Insert the flaps into the slots (one side at a time for ease).
Step 5
Now fold the top of each flap upwards inside the box so they sit flush against the verticle sides. This will ensure they can't move back out of the hole, securing it in place.
Step 6
Fold the 2 sides on the lid into place & fold the flaps around as shown.
Step 7
Fold the top section of the lid along the crease lines ensuring it maintains shape.
Step 8
Tuck the 2 small inserts into the slots. This will secure the flap of the lid in place, preventing it from unfolding.
Step 9
Fold the lid down over the base ensuring the sides on the lid remain outside the base.
You're all done!
Product Boxes / Bottle Boxes
Step 1
Place the net so the inside face is upwards.
Step 2
Locate double sided tape in the highlighted area & remove film.
Step 3
Fold the side around & stick to the double sided tape ensuring it sits flush with the edge of the box.
Step 4
Fold The 2 smaller flaps in place, flush with the bottom & top of the box.
Step 5
Fold the larger flap around and tuck the small flap inside the box to secure.
If you would like to seal the box, we recommend our PVC free vinyl labels.
You're all done!
2 Piece Product Boxes
Step 1
Establish the base & lid net & place the net so the inside is facing upwards. The base is the larger of the 2 pieces (Right image).
Step 2
Fold the 2 sides with the flaps vertically & tuck the flaps inside.
On the 2 adjacent sides fold down the top section downwards.
Step 3
Now fold the 2 adjacent sides up so all 4 sides are sat vertically.
Step 4
Now fold these sides into the box, over the top of the flap. The end of the sides you folded in step 2 should be sat outwards on the base.
Step 5
Now fold the other 2 sides over & tuck them into the box. The small flap should fold down & outwards the same as the flap on the adjacent sides.
Step 6
All 4 of the internal flaps should push against eachother supporting themselves.
Ensure the folds are as tight as possible to prevent the box unfolding.
Shop Printed Packaging
